We love being able to do new things, so when the customer told us she needed railings for her patio we jumped at the chance.

The newels and main railings are of aromatic red cedar found in the woods around the house. Care was taken to find just the right curves and sizes. We spent a weekend walking the property with marking tape and a chainsaw picking out likely candidates. With a pile of what looked like the start of a good bonfire we began selecting our posts. The posts are set on 2” galvanized pipe core drilled into the sub stair. They were later embedded in 8” of concrete and stone. We got to use some cool tenon cutters and our 1/2” hole hog drill to do the joinery and added a wedge just for fun. The vine work was grape and Osage orange. It was wired and nailed with hand cut clinch nails to the structure. No finish required.

Posted under Exterior, Other Work, Stairs & Railings by Marc Kunkel on Tuesday 11 November 2008 at 11:47 am

These garden gates were made of mahogany with tongue and groove panels. These gates also include full through mortise and tenon construction.

Posted under Exterior, Gates by Mike Kunkel on Tuesday 28 October 2008 at 4:00 pm

These gates can be seen on Hillsboro Rd. They are constructed of spanish cedar, with full through mortise and tenon construction

Posted under Exterior, Gates by Mike Kunkel on Tuesday 28 October 2008 at 3:48 pm

This job included three pairs of gates and 200 feet of fencing, all in spanish cedar. The gates all include mortise and tenon construction and tongue and groove panels.

Posted under Exterior, Gates by Mike Kunkel on Tuesday 28 October 2008 at 3:42 pm


Before After

These storefront columns were originally made of iron. Over time the metal started deteriorating. We were asked to carve reproductions of the columns. Some of the original columns still stand.

Posted under Carving, Exterior, Other Work, Panels by Mike Kunkel on Tuesday 28 October 2008 at 1:59 pm

Next Page »